News:

Established July of 2008, and still going strong! 

Main Menu

Dove tails....

Started by Micanopy, January 29, 2015

Previous topic - Next topic

Micanopy

Can anyone walk me thru it, what files I need, and especially how to do it right and not goof it up? Pictures would be very  helpful

Papa

If you contact Ed at Cain's outdoors in Williamstown WV, he sells a little devise that attaches to your barrel and gices you a pattern that allows you to cut dovetails pretty easily and accurately. Comes with directions.
Mark

Hanshi

Dove tails is what I see when I go dove hunting. [hmm]
Young guys should hang out with old guys; old guys know stuff.


gunmaker

Practice on a chunk of old bbl.    Paint top (be sure it's the top) flat bbl. with sharpie--or ?   Hold site against bbl. mark the top of dovetail width on flat. Scribe lines little smaller than width with a small square.  Now scribe a line on both oblique flats little more'n 1/16" below top flat.  Now with a sharp new hack saw blade cut a series of grooves in bbl.   Get a small square file and slow grind a smooth flat on one side.  Put smooth side against 1st cut and clean up the opening staying sq. to top flat.  Two ways--or more to make undercuts.  Triangle file with a smooth flat, goin ther and make a dovetail that way.  OR--the fun way,  With a 1/2" sharp cold chisel, put it against inside shoulder of cut and whack it a few times forging a dovetail, some clean up with a tria. file.  Paint site & try it in slot--keep filing fitting until she goes in 1/2 way, mark site so you go in same way each time.  They don't need to be very deep and the raised bumps from the hammer give kind of a nice look,  lots of old guns show the bumps.   Heres the start of a dovetail on a gun   ...Tom

click to see few more.   good luck.

hotfxr

 srndr  I am staying out of this one, too easy. As a matter of fact, I might just spend the whole day without being a wiseacre. It could happen.
I am the one your mom warned you about!

Dogshirt

Quote from: hotfxr on January 30, 2015
srndr  I am staying out of this one, too easy. As a matter of fact, I might just spend the whole day without being a wiseacre. It could happen.

It COULD happen, but........ :mini-devil-28492:

hotfxr

#6
Quote from: Dogshirt on January 30, 2015
Quote from: hotfxr on January 30, 2015
srndr  I am staying out of this one, too easy. As a matter of fact, I might just spend the whole day without being a wiseacre. It could happen.

It COULD happen, but........ :mini-devil-28492:

Well, I see the reclusive hermit of the Northwest is still with us. I have been leaving baited traps all over this place for you and you haven't tripped even one. I just figured you were afraid after I posted my outfit picture. It's hard to compete with that level of rugged handsomeness.   ROFL  Oh crud, I didn't even make it through one day.  hdslp
I am the one your mom warned you about!

Red Badger

"The table is small signifying one prisoner alone against his or her suppressors..."

Dogshirt


Micanopy

Great! Thanks Gents... I'll let you know what happens......

Micanopy

Papa, I found the Jig at Jedediah Starr, have to order one. Looks easy enough to do,,,,